In March, 2022, the US Department of Energy (DOE) incorporated the new industry standard EERE-2016-BT-TP-0023, and in September of the same year, it published a new version of TV testing method ANSI/CTA-2037-D to replace the original TV equipment method Appendix H.
Background:
Since the publication of the final regulation (EERE–2010–BT–TP–0026) in October 2013, TV technology has developed significantly. In September, 2022, DOE proposed to incorporate ANSI/CTA-2037-D into 10 CFR 430.3, so as to make the test procedure more representative of the average energy consumption of TV sets.
ANSI/CTA-2037-D involves many technologies that have not been considered in the development of the current DOE test program in appendix H, such as UHD, HDR, etc., and also specifies the configuration and setting requirements of these technologies to improve the representativeness of the current DOE test program in appendix H. Compared with the current DOE test program in Appendix H, the screen brightness and power consumption test specified in ANSI/CTA-2037-D are as follows.
Execution time:
The new rule EERE-2016-BT-TP-0023 came into effect on April 14th, 2023, and this procedure will be enforced for product testing from September 11th, 2023.
Scope of application:
The product aims to generate dynamic video, including an internal TV tuner encapsulated in the product shell, and can receive dynamic visual content from wired or wireless sources, including but not limited to broadcast signals, display signal specific data connections, media storage devices and network connection devices.
Television products with a diagonal screen size of at least 15 inches
Television products supplied by commercial power (including TVs with auxiliary batteries, but excluding TVs with main batteries)
The purpose and main requirements of the new rules:
The purpose of the new rules is to ensure that the current situation of TV use produces representative energy consumption measurements and will not cause excessive burden. New requirements are put forward for test signals and equipment, which are briefly described as follows:
Test signal requirements:
SDR (Standard Dynamic Range) Brightest Mode and Default Mode Test Signals:Standard definition:
IEC_Broadcast_SD_5994p_SDR_HEVC_AAC.mp4High definition: IEC_Broadcast_HD_5994p_SDR_HEVC_AAC.mp4HDR (high dynamic range) default mode test signal:High definition: IEC_Broadcast_HD_5994p_HDR10_HEVC_AAC.MP4Ultra-high definition: IEC_Broadcast_UHD_5994p_HDR10_HEVC_AAC.MP4Equipment requirements:Using dynamic camera photometer to replace traditional static luminometerUse related intelligent test equipment such as Smart Speaker and Smart Phone.For the equipment with automatic brightness control function, the test equipment uses
LED reflective lamp instead of incandescent lamp.
（We adhere to a scientific and rigorous working attitude, take customers as the center, efficiently arrange the test plan as a whole, try our best to shorten the test period, and provide customers with fast and fair third-party consulting and testing services. The service areas are all over Guangzhou, Shenzhen, Dongguan, Foshan, Zhongshan, Zhuhai, Qingyuan, Huizhou, Maoming, Jieyang, Meizhou, Jiangmen, Zhaoqing, Shantou, Chaozhou, Heyuan, Shaoguan and other parts of the country. If you need to consult related products, you are welcome to come directly to 18165787025 to consult our staff and get detailed information such as cost quotation and cycle plan. Shenzhen Xunke looks forward to your visit.）